Welcome to Shenzhen Shunda Rong Technology Co., Ltd. official website

Service Hotline
0755-21042483
15919435516
  • Shenzhen shundarong Technology Co., Ltd
  • Shenzhen shundarong Technology Co., Ltd
  • Shenzhen shundarong Technology Co., Ltd
FAQ
HomeNewsFAQ>Precautions for installation of wall mounted touch all-in-one machine

Precautions for installation of wall mounted touch all-in-one machine

Source:Shenzhen shundarong Technology Co., LtdPopularity:162Time:2022-09-26smallinBig

Precautions for installation of wall mounted touch all-in-one machine


The wall mounted touch all-in-one machine touches the device environment, device location, load-bearing wall conditions, support load-bearing and other effects, so consumers must master the device skills when installing to ensure the normal use of the touch all-in-one machine. The following is the knowledge about the installation precautions of the wall mounted high-definition touch all-in-one machine, hoping to help consumers.


1. The environment of wall mounted touch all-in-one device should not be wet

The touch all-in-one machine should not be temporarily placed in a humid environment. Because many televisions are not waterproof, the touch all-in-one machine device will be damaged if it is too close to the moisture. Also, we should try to prevent the influence of strong electricity and strong electromagnetic field objects. For example, electromagnetic appliances, mobile phones and other electrical appliances that can be moved at will should be as far away from TV as possible, and other large household appliances should not be placed near advertising machines.


2. The wall of the wall mounted touch integrated device must be solid

Consumers must install wall mounted digital signs on walls with high strength such as solid bricks and concrete. It is assumed that if the installation is to be carried out on the wall with too thick wood or exterior decorative layer, reinforcement and support measures must be taken first. In addition, we should understand that the carrying capacity of the device surface should be no less than 4 times of the practical carrying capacity of the wall mounted touch all-in-one machine, and the advertising machine should not tip when the rear of the device tilts 10 °.


3. The bracket of wall mounted touch integrated machine should be selected properly

① It is very important to choose a suitable bracket for the wall mounted touch all-in-one machine. First, make clear the classification of brackets. At present, brackets on the market are mainly divided into adjustable angle hangers and fixed angle hangers.


② The wall mounted touch all-in-one machine rack shall ensure easy maintenance and repair of the digital signage machine after the device, and easy assembly without damaging the device surface and device rack.


③ When buying a wall bracket, you must reflect on whether the device bracket can include the wall connection part, product connection part, fastener part, device diagram and operation instructions, and must conform to the FDMI specification of the international VESA organization. In addition, the wall mounted touch all-in-one machine is reasonably installed after the above steps, which not only saves space, but also becomes the decoration of the living space with decorative characteristics.


These are the three things KAWDEN should pay attention to when installing the wall mounted touch all-in-one machine. If you have better suggestions, you can leave a message and hope we can make progress together.

Consulting Service
Users in the course of any problems encountered, can call the free consultation Tel: 0755-21042483 Advisory
Replacement Service
Replacement period of the product, if there is indeed due to factory quality problems caused by the reasons, the user can go to the dealer free of charge.
Warranty Service
Warranty period of the product, if a quality problem, can go to the local after-sales service center to enjoy the warranty service.
Maintenance Service
Maintenance period of the product, if a quality problem, the user can go to the local after-sales service center or commissioned by the dealer for repair services.
Shop
  • Shenzhen shundarong Technology Co., Ltd
  • Shenzhen shundarong Technology Co., Ltd